Asphalt
- APO301: Apply Occupational Health and Safety during Work-Practices
- APO302: Identify Systems, Equipment and Components
Block Laying
- SBL 201: Health and safety during work practices
- SBL 202: Identification of systems, equipment and components
- SBL 203: Reading of drawings and calculations
- SBL 204: Laying of limestone and hollow concrete blocks to line
- SBL 301: Health and safety during work practices
- SBL 302: Identification of systems, equipment and components
- SBL 303: Reading of drawings and calculations
- SBL 304: Laying of limestone and hollow concrete blocks to line
Concrete
- CL201 – Occupational Health and Safety in the Work Place
- CL202 – Systems, Equipment and Components
- CL203 – Reading of Drawings and Calculations
- CL204 – Concrete Ordering and Casting
- CL301 – Occupational Health and Safety in the Work Place
- CL302 – Systems, Equipment and Components
- CL303 – Reading of Drawings and Calculations
- CL304 – Concrete Ordering and Casting
- CL401 – Occupational Health and Safety in the Work Place
- CL402 – Systems, Equipment and Components
- CL403 – Reading of Drawings and Calculations
- CL404 – Concrete Ordering and Casting
Demolition
- DEM21. Contribute to health and safety requirements in the workplace
- DEM22. Assist in removing and separating materials (demolition – clearing buildings and structures) in the workplace
- DEM23. Assist in operating handheld power tools and equipment in the workplace
- DEM24. Assist in demolishing and dismantling existing structures (by hand) in the workplace
- DEM31- Contribute to health and safety requirements in the workplace
- DEM32- Remove and separate materials (demolition – clearing buildings and structures) in the workplace
- DEM33- Operate portable powered plant and equipment in the workplace
- DEM34- Demolish and dismantle existing structures (by hand) in the workplace
- DEM35 – Operate small mobile plant equipment to remove and separate demolished materials
- DEM31- Contribute to health and safety requirements in the workplace
- DEM32- Remove and separate materials (demolition – clearing buildings and structures) in the workplace
- DEM33- Operate portable powered plant and equipment in the workplace
- DEM34- Demolish and dismantle existing structures (by hand) in the workplace
- DEM35 – Operate small mobile plant equipment to remove and separate demolished materials
- DEM41 – Carry out health and safety requirements in the workplace
- DEM33 – Operate portable powered plant and equipment in the workplace
- DEM42 – Supervise and operate mobile plant equipment to remove and separate demolished materials in the workplace
- DEM43 – Ensure good progress of work operations
- DEM44 – Supervise demolition works
Dry Rubble Wall
- ADRWB201: Health &Safety during work practices
- ADRWB202: Identification of systems, equipment, and components
- ADRWB203: Reading of drawings and calculations
- ADRWB204: Assisting building a rubble wall
- DRWB301: Health & Safety during work practices
- DRWB302: Identification of different rubble stones
- DRWB303: Reading of drawings and calculations
- DRWB304: Laying of dry rubble wall
Electrical
- AEE: 201 Apply Occupational Health and Safety and Working Practices
- AEE: 202 Assist in the Electrical Installation Work
- AEE: 201 Assist in the Maintenance of Electrical Installations and equipment
- AEE: 201 Assists in the Testing of Electrical Installations and Equipment and in the Required Documentation
Excavation
- EXC21 Contribute to health and safety requirements in the workplace
- EXC22 Assist in protecting services and substructures in the workplace
- EXC23 Operate portable powered plant and equipment in the workplace
- EXC24 Assist in manually excavating ground and surfaces to form holes and trenches
- EXC25 Assist in manually re-instating excavated surfaces, holes and trenches
- EXC31. Contribute to and carry out health and safety requirements in the workplace
- EXC32. Locate and protect services and substructures in the workplace
- EXC33. Operate portable powered plant and equipment in the workplace
- EXC36. Excavate ground and surfaces to form holes and trenches both manually and mechanically using small machinery
- EXC37. Re-instate excavated surfaces, holes and trenches both manually and mechanically using small machinery
- EXC31. Contribute to and carry out health and safety requirements in the workplace
- EXC32. Locate and protect services and substructures in the workplace
- EXC33. Operate portable powered plant and equipment in the workplace
- EXC34. Manually excavate ground and surfaces to form holes and trenches
- EXC35. Manually re-instate excavated surfaces, holes and trenches
- EXC41. Supervise and carry out health and safety requirements in the workplace
- ECX33. Operate portable powered plant and equipment in the workplace
- EXC42. Instruct and direct manual excavation of ground and surfaces to form holes and trenches
- EXC43. Carry out secondary dimensional control for excavation operations
- EXC44. Monitor and contribute to the progress of work operations
- EXC45. Operate mobile plant equipment to excavate ground and various materials
Falsework and Formwork
- FFE201: Apply Occupational Health and Safety during Work Practices
- FFE202: Identify systems, equipment and components
- FFE203: Setting Out Formwork and Falsework Erecting and Dismantling
- FFE301: Apply Occupational Health and Safety during Work Practices
- FFE302: Identify systems, equipment and components
- FFE303: Reading of drawings and calculations
- FFE304: Setting Out Formwork and Falsework Erecting and Dismantling
- FFE401: Apply Occupational Health and Safety during Work-Practices
- FFE402: Identify systems, equipment and components
- FFE403: Reading of drawings and calculations
- FFE404: Setting Out, Formwork and Falsework Erecting and Dismantling
Gypsum Boards Installation
- GBI201: Apply Occupational Health and Safety during Work-Practices
- GBI202: Identify systems, equipment and components
- GBI203: Reading of drawings and calculations
- GBI204: Setting Out and Installation of gypsum boards
- GBI301: Apply Occupational Health and Safety during Work-Practices
- GBI302: Identify systems, equipment and components
- GBI303: Reading of drawings and calculations
- GBI304: Setting Out and Installation of gypsum boards
Lift Installation
- ASI1 – Health and Safety in the Lift Industry
- ASI2 – Basic Theory – Maths & Physics for lifts installation
- ASI3 – Electrical and Mechanical Principles for Lifts Installations including Engineering Drawings
- ASI4 – Lift Installation
- LIN1 – Unit 1 Health and Safety in the Lift Industry
- LIN2 – Unit 2 Lift Equipment and Components
- LIN3 – Unit 3 Electrical Wiring & Equipment
- LIN4 – Unit 4 Pit Equipment, Guide Rails, Hydraulic Theory & Installation
- LIN5 – Unit 5 Traction Lift Installation
- LIN6 – Unit 6 Hydraulic Lift Installation
- LINS1 – Unit 1 Health and Safety in the Lift Industry
- LINS2 – Unit 2 Lift Equipment and Components
- LINS3 – Unit 3 Electrical Wiring & Equipment
- LINS4 – Unit 4 Pit Equipment, Guide Rails, Hydraulic Theory & Installation
- LINS5 – Unit 5 Traction Lift Installation
- LINS6 – Unit 6 Hydraulic Lift Installation
- LMT1 – Unit 1 Statutory Regulations, Lift Standards and Safety Requirements
- LMT2 – Unit 2 Using drawings and documents in maintenance activities
- LMT3 – Unit 3 Fault Diagnosis and checking lift function
- LMT4 – Unit 4 Rectifying faults & Replacement of major parts e.g. ropes, lift doors, buffers, sheaves, hydraulic oil and hydraulic components
- LMT5 – Unit 5 Emergency evacuation of trapped passengers
- LMT6 – Unit 6 Control Panels LMT7 – Unit 7 Health and Safety in the Lift Industry
Marine Civil Works
- AMCWS301: Identification of marine civil engineering projects
- AMCWS302: Tasks in marine civil engineering projects
- AMCWS303: Materials and technical requirements in marine civil engineering projects
- AMCWS304: Health and safety, and security during work practices
- AMCWS305: The role of the Assistant Marine Civil Works Supervisor
- MCWS401: Identification of marine civil engineering projects
- MCWS402: Tasks in marine civil engineering projects
- MCWS403: Materials and technical requirements in marine civil engineering projects
- MCWS404: Health and safety, and security during work practices
- MCWS405: The role of the Marine Civil Works Supervisor
Plastering
- APL: 201 Apply Occupational Health and Safety and Working Practices
- APL: 202 Identify Systems, Equipment and Components
- APL: 203 Calculating, Positioning and Drawing
- APL: 204 Identifying and Applying Systems, Equipment and Components
- APL: 301 Apply Occupational Health and Safety and Working Practices
- APL: 302 Identify Systems, Equipment and Components
- APL: 303 Calculating, Positioning and Drawing
- APL: 304 Identifying and Applying Systems, Equipment and Components
Plumbers
- BAP: 201 Apply Occupational Health and Safety and Working Practices
- BAP: 202 Identify Systems, Equipment and Components
- BAP: 203 Calculating, Positioning and Drawing
- BAP: 204 Identifying and Applying Systems, Equipment and Components
- BUP: 301 Apply Occupational Health and Safety and Working Practices
- BUP: 302 Identify Systems, Equipment and Components
- BUP: 303 Calculating, Positioning and Drawing
- BUP: 304 Identifying and Applying Systems, Equipment and Components
- BUP: 305 Maintain Effective Relationships
- BUP: 306 Identify, Rectify, and Plan Maintenance
Residential Aluminium Fabrication
- RAF201: Apply Occupational Health and Safety during Work-Practices
- RAF202: Identify systems, equipment and components
- RAF203: Reading of drawings and calculations
- RAF304: Fabricate and install aluminium residential doors and windows
- RAF301: Apply Occupational Health and Safety during Work-Practices
- RAF302: Identify systems, equipment and components
- RAF303: Reading of drawings and calculations
- RAF304: Fabricate and install aluminium residential doors and windows
Road Construction
- CFRC301: Apply Occupational Health and Safety during Work-Practices
- CFRC302: Identify Systems, Equipment and Components
- QCRC301: Apply Occupational Health and Safety during Work-Practices
- QCRC302: Quality Control and Testing
- QCRC303: Co-ordination and Reporting
- RCI301: Apply Occupational Health and Safety during Work-Practices
- RCI302: Systems, Equipment, Materials, Testing and Components
- RCI303: Reading of Drawings, Setting Out and Calculations
- RCI304: Site Inspections and Supervision
- RCI305: Reporting and Coordination
Scaffolding and Access
- SCF201: Apply Occupational Health and Safety during Work-Practices
- SCF202: Identify systems, equipment and components
- SCF203: Reading of drawings and calculations
- SCF204: Setting Out, Erecting and Dismantling Scaffolds and Access Equipment
- SCF301: Apply Occupational Health and Safety during Work-Practices
- SCF302: Identify systems, equipment and components
- SCF303: Reading of drawings and calculations
- SCF304: Setting Out, Erecting and Dismantling Scaffolds and Access Equipment
- SCF401: Apply Occupational Health and Safety during Work-Practices
- SCF402: Identify systems, equipment and components
- SCF403: Reading of drawings and calculations
- SCF404: Setting Out, Erecting and Dismantling Scaffolds and Access Equipment
Steel Fixing
- SBL201: Apply Occupational Health and Safety during Work-Practices
- SBL202: Identify systems, equipment and components
- SBL203: Reading of drawings and calculations
- SBL204: Bar bending and steel fixing production
- SBL301: Apply Occupational Health and Safety during Work-Practices
- SBL302: Identify systems, equipment and components
- SBL303: Reading of drawings and calculations
- SBL304: Bar Bending and steel fixing production
- SBL401: Apply Occupational Health and Safety during Work-Practices
- SBL402: Identify systems, equipment and components
- SBL403: Reading of drawings and calculations
- SBL404: Bar bending and steel fixing production
Stone Works
- SBL401: Health and safety during work practices
- SBL402: Identification of systems, equipment, and components
- SBL403: Reading of drawings and calculations
- SBL404: Stone Mason
Tile Laying
- ATL: 201 Apply Occupational Health and Safety and Working Practices
- ATL: 202 Identify Systems, Equipment and Components
- ATL: 203 Calculating, Positioning and Drawing
- ATL: 204 Identifying and Applying Systems, Equipment and Components
- TLY: 301 Apply Occupational Health and Safety and Working Practices
- TLY: 302 Identify Systems, Equipment and Components
- TLY: 303 Calculating, Positioning and Drawing
- TLY: 304 Identifying and Applying Systems, Equipment and Components